BMW GPS + USB Interface

The GPS + USB Interface MID010005 is the perfect connection for connecting navigation systems or other electrical devices, e.g. USB sockets, to BMW motorcycles. The interface also solves the problem of gradual battery discharge when connecting non-original navigation systems such as Garmin Zumo series navigation systems or TomTom Rider devices. In addition, all other additional devices are safely switched off from the BMW motorcycle CAN bus, preventing the battery from discharging. Without using the GPS interface, the battery is loaded and discharged unnoticed even when the ignition is turned off. The interface reliably separates the power connection between the motorcycle and the navigation system and protects the battery from discharging. The connection is ideally made using the prepared BMW SA accessory plug - Cartool plug (SA for special accessories) of all BMW motorcycles:

F650GS Twin, F700GS, F800GS, F800R. F800S, F800ST, F750GS, F850GS, R1200GS, R1200GS LC, R1250GS, R1200R, R1200R LC, R1250R, R1200S, R1200ST, R1200RT, R1200RT LC, R1250RT, R1200RS, R1250RS, R1300GS, R1300RT, R1300RS, RnineT, RnineT Scambler, RnineT Racer, RnineT Urban GS, S1000RR from 2015, S1000R, S1000XR, HP2 Enduro, HP2 Megamoto, HP2 Sport, K1200S, K1200R, K1200ST, K1300S, K1300R, K1300ST, K1600GT, K1600GTL, K1600B, C600, C650GT, Cevolution, R1800, F900R, F900XR, R18 (Special BMW SZ-accessory plug)

The SA accessory connection socket is already pre-fitted at the factory on all of the above models. The position of the SA accessory plug depends on the BMW model and is described in the on-board literature for the machine. You can find an overview in our FAQs: BMW SA accessory plug . By using the interface, in which the original BMW CAN bus connector is already installed, the unwanted gradual discharge of the battery in idle mode is prevented in vehicles with a CAN bus system. The connection is made via plug and play, the connection of the power set is done quickly and optimally without any tools using the solder connectors included in the delivery.

The original BMW repair plug 83 30 0 413 585 (Cartool accessory plug) is installed in the BMW GPS + USB interface for 100% compatibility.

Note: The GPS + USB interface is not compatible with the battery charger with part number 71 60 7 688 864!

If you want to continue using the BMW Motorrad Navigator with the original mount cradle, you will need the BMW GPS Interface Y !

The BMW R18 has a special SZ plug! Here is the Variant with the special SZ accessory plug required.

We recommend the motorcycle battery charger MID010000

Our guarantee: easy installation - no more empty battery of your BMW motorcycle

Scope of delivery: MID010005 GPS + USB Interface
2 solder connectors with shrink tubing (no tools required)

Made in Germany

Made for BMW Motorrad

The BMW GPS + USB interface is available from your BMW Motorrad service partner and BMW branches.